螺旋压力机机身的有限元研究及优化-材料加工工程专业毕业论文.docxVIP

华 华 中 科 技 大 学 硕 士 学 位 论 文 II II Abstract Electric screw press is an Important one of pressure processing equipment.The traditional design methods has a lot of Defects such as Long design cycle, structural redundancy, high costs, lack of result verification. Faced with increasingly fierce market competition, Enterprises urgently need to know the stress and strain of electric screw press in the Working conditions ,and further more, to optimize the structure of the press. The finite element analysis technology used by This paper is the ideal method to solve these problems. First of all, this paper introduces the screw press’s structural features, design method ,application of the finite element method, and structural optimization theory and methods, and domestic and foreign research of press frame finite element analysis. this paper Supplied with a method of press static finite element analysis and structural optimization. By analysis of the Press static situation ,this paper get the cloud of stress and displacement. Compared finite element analysis results with the mechanical calculation results, Verify accuracy of finite element analysis results. This paper figure out a finite element method to solve Local stress problems which can’t be solved by the mechanical method. Secondly, through the modal analysis of the screw press, this paper get the first ten modal shapes ,and then analysis the impact of each modal shape. Thirdly, in optimum design, according to the analysis result if static analyze, on the condition of guaranteeing the processing precision , the weight of the frame is reduced ,the concentration of stress, which may causes the weary destruction ,is relieved. Fourthly, optimize the transition fillet of the press frame. Get the function of stress and fillet radius.To supply the design of fillet radius of press with reference . Key words: Press Finit element method Optimization Static analysis Modal analysis PAGE IV PAGE IV 目 录 摘 要 I Abstract II 1 绪论