物料编码规则+开油作业指导书+喷油控制.docVIP

题目：物料编码规则 文件编号 : WI-EN-016A 发行版次 : A 生效日期 : 2008年01月01日 总页数 : 20 制 定： 日 期 审 核： 日 期 审 批： 日 期 非红色盖章的为不受控文件 请参阅受控版本。 INTRODUCTION The part number is in the format of NAB-CDEFGH or AB.CDEFGH The N letter indicates the parts which is not meet Rohs request, if here^s not N letter before A it indicates the material which is met Rohs request. A is the commodity code, which is used to classify similar parts and their related documentations. The seven digits BCDEFGH after the prefix code performs a logical readable number for a part. But for the product to be needed BCDEFGHI total 9 digits. It indicates the number or physical parameters of each individual part. In some cases where the number is insufficient to describe the parts, then the digits indicate the reference number on which all mechanical and or electrical parameters must be shown. Besides, there are many codes about the classification of parts and material or manufacturer code etc., have not been assigned, which will be reserved for future usage and expansion. Please do reminded that all the code assigned should be obtained from Engineering Department so as to prevent further confusion. GENERAL RULES Any digit which is not applicable or not used should be entered as zero. The weighting scheme should be same the fixed resistor. 3,In any case the system fails to cope with Zero value should be entered and the reference number is utilized instead. The reference file associated with each parts list must be completed before the parts list is issued. A reference master file and a manufacturer master file are maintained. PARTS CODING 零件編碼 (N)ABCDE.FGH Group Number类别编号： NABCDE?FGH indicates the materials which is not met Rohs ABCDE.FGH indicates the materials which is met Rohs page I 3 Plug pin / screw/ Raw Material 插针/螺丝/須胶原料 5-7 II 4 Mic咪类 7-8 III 5 Speaker 8-9 IV 6 Wire line 9 V 7 Electrical Component 9-13 VI 8 Products 13 VII 9 Packing / Auxiliary Material/ 13-15 Miscellaneous parts Auxiliary Material, Tools, Stationary