三相四线制有源电力滤波器建模与仿真-电力系统及其自动化专业论文.docxVIP

华北电力人学硕上学位论文摘 华北电力人学硕上学位论文 摘 要 本文以三相四线制并联有源电力滤波器(APF)为研究对象，对其几种主电路 常用拓扑结构的补偿能力进行了量化分析，并指出四桥臂拓扑结构相对于其他结构 的优点。对四桥臂拓扑结构APF输出电压进行空间矢量分析，提出可将其分解为对 称分量和零序性分量的数学模型对其分别控制的思想，指出了对称分量和零序性分 量相互间影响的机理。进而将应用于三相三线制并联APF的定频滞环控制策略应用 于APF输出电压的对称分量控制中，并改进了该策略中某些参数的设计方法。在上 述结论的基础上提出了设计APF主电路参数的方法，该方法具有一定实用价值。应 用PSCAD／EMTDC以及RTDS建立APF仿真模型，仿真结果验证上述理论的正确性和 有效性。 关键词：三相四线制，有源电力滤波器，四桥臂拓扑结构，定频滞环控制 ABS’I’RAC’l’ IIl tllis thesis，3-phase 4-wire parallel active power filter(APF)has been took for study,the compensation capacity of its main circuit topologies has been took for quantitative analysis，and it’S pointed out that the four-arm bridge topology has several advantages compared to other structures．The output voltage of the four-arm bridge topology APF has been took for space vector analysis，and the mathematical model that The output voltage be divided into symmetrical component and zero．sequence component is put forward，the idea that they Can also be separately controlled is put forward，and the inter-mechanism of how the symmetrical component and zero-sequence component impact each other is pointed out too．On this basis，a fⅨed frequency hysteresis control strategy used in three-phase three·wire parallel APF has been took for controlling the symmetrical component of the APF’s output voltage，and the design method of some parameters of the strategy has been improve in．On the basis of the above conclusions，a design method for parameters of APF main circuit has been put forward， the method Can be used in practical projects．Based application of PSCAD／EMTDC and RTDS，of the simulation model of APF has been established，the results of simulation show the correctness and effectiveness of the theory． Cao Tianzhi(Power System and its Automation) Directed by prof．Xiao XiangNing KEY WO RDS：3-phase 4-wire，active power filter,four-arm bridge topology,fixed frequency hysteresis control 华北电力人学硕上学位论文摘 华北电力人学硕上学位论文 摘 要 本文以三相四线制并联有源电力滤波器(APF)为研究对象，对其几种主电路 常用拓扑结构的补偿能力进行了量化分析，并指出四桥臂拓扑结构相对于其他结构 的优点。对四桥臂拓扑结构APF输