三支点型材成形的控制方法及送料机构的研发-机械电子工程专业论文.docxVIP

A A Dissertation Submitted to Guangdong University of Technology for the Degree of Master of Engineering Three Pivots Profile Control Methed and the Development of the Feeding Mechanism Master Candidate：Tian Lieyu Supervisor：Prof．Wu Baihai May 2011 School of Electro-mechanical Engineering Guangdong University of Technology Guangzhou，Guangdong，P．R．China。51 0090 ABSTRACTABSTRACT ABSTRACT ABSTRACT With the rapid development of China’S shipbuilding industry,the demand of cold formed sections continues to surge and Cold forming equipment and technology has also been a rapid development．Profile bending machine that has used adjustable from three-point concentration Bending theory is profile bending equipment． Firstly,this paper discusses the background of the subject，purpose and meaning，and introduces the control method of forming profiles，then presents a new control method for cold forming which is based on non-endpoint called chord angle detection control method．This method abandoned many shortcomings of the past endpoint control method．For example：large testing organizations that not only cover a great area，costs higher,installs difficult，operates inconvenience，maintains difficult，but also cause its rail wear and deformation，resulting in a decline in precision processing equipment and Forming the profile errors．This control method also uses mathematical theory，graphic drawing and experimental method to validate correctness and feasibility of chord angle detection control method．Chord angle detection and control method proposed in this paper is the first point of innovation． According to the proposed requirements of chord angle detection and control method， must improve the original rollers feeding and the ordinary hydraulic cylinder feeding to avoid feeding error and accumulated eTlTor．Firstly，this paper explores the problem of feeding length and fulcrum distance to indicate the direction to improve feeding mechanism．The improvement of the feeding mechanism includes