毕业设计论文－年产8万吨冷轧薄带钢车间工艺设计及森吉米尔轧机轧辊使用及质量控制.doc

辽宁科技大学本科生毕业设计 第 PAGE 62页 辽宁科技大学本科生毕业设计 年产8万吨冷轧薄带钢车间工艺设计 及森吉米尔轧机轧辊使用及质量控制 摘要 本设计说明书是参照XX冷轧厂设计的年产8万吨冷轧带钢厂。其典型产品为：SPCC 0.22×995 mm。该论文主要包括四部分内容。第一部分是绪论，简要地概括了冷轧板带钢目前发展状况、相关技术以及发展方向。第二部分是论文的主体部分，从第一章到第七章，详细介绍了如何设计冷轧带钢厂生产的各个环节。设计时以年产量为基础，结合产品的市场前景合理的分配了各产品的产量,并且制定了一系列的工艺制度，进行了轧机能力校核，确定了各项经济指标，最后绘制了车间平面图。在第三部分，我以森吉米尔轧机轧辊使用及质量控制为专题，具体论述了森吉米尔轧机轧辊的成分及制作、磨削加工、配置以及对产品质量的影响。 关键词：冷轧带钢；车间设计；轧制规程；轧辊 ABSTRACT The design is about the process engineering design of a cold rolling strip mill plant, which produces 80.000 per year,according to Shougang Cold Rolling Strip Mill Plant.Its tipical production is SPCC 0.22×995.This paper is composed of four parts. The first part is the introduction, which briefly sum up the present development, interrelated technology as well as the development orientation of the cold rolling strip. The second part is the main part referring to Chapter 1 to Chapter 7, which particularly introduces how to design each tache of the production of the seamless steel tube mill. According to the production of a year and these productions’ prospect in the market, I raaesonably distribute the production of them, design the rolling operation system for the product, check the rolling mills’ producting capacity and calculate the economic qualification, and draw a plan figure for this workshop. In the part three, I particularly discuss the use of the mill, discuss mills’ components and manufacture, grinding, configuration and effect on product quality in detail. Key words: cold rolled strip, workshop design, rolling, roll 目录 摘要 I ABSTRACT II TOC \o 1-3 \h \z \u 1 综述 1 1.1 冷轧薄钢板生产的发展概况 1 1.2 冷轧薄板生产特点 2 1.3 冷轧板带钢的轧制工艺特点 4 1.3.1 加工硬化 4 1.3.2 工艺冷却与润滑 4 1.3.3 张力轧制 6 1.4 冷轧生产工艺流程 6 1.4.1 酸洗 8 1.4.2 轧制 9 1.4.3 精整 10 1.4.4 镀锌 10 1.4.5 矫直 11 1.5 冷轧产品的技术要求 11 1.6 冷轧机的发展历史 12 1.7 冷轧机的布置形式 14 1.7.1 单（双）机架可逆式冷轧机 14 1.8 轧机方面新