三维零件库的设计与实现-机械工程专业论文.docxVIP

摘 摘 要 摘 要 零件库是CAD软件的重要组成部分。鉴于目前三维图形软件已得到广泛应 用，本文针对一般机械产品设计，设计和开发了一个三维零件库原型系统，并获 得初步成功。 三维零件库是一个综合了各种软件技术的复杂系统，包括特征造型技术、数 据库技术、参数化设计技术等。论文在对三维零件库进行功能分析的基础上，重 点讨论了参数映射机制的原理及其在零件库系统中的实现方法，给出了零件库中 的建立参数映射的流程，分析了参数映射动态修改的难点问题，并提出了相应的 解决措施。 在三维零件库的设计和开发过程中，作者采用面向对象的建模和设讨+方法， 较好地解决了零件库中零件种类繁多和关系复杂的问题，使零件库结构清晰，易 于组织与实现。 本文主要分为六章。第一章是绪论部分，介绍了零件库及其相关技术的发展 现状，提出本文主要工作。第二章对三维零件库的功能和要求进行了分析。第三 章给出了三维零件库体系结构和总体设计方案。第四章阐述了三维零件库的具体 实现方法，并对其中的关键技术进行了讨论。第五章给出了一个小型注塑模具设 计实例，用以说明零件库的实际使用方法。第六章对论文进行了总结和展望。 关键词： 三维零件库 参数映射特征造型数据库 AbstractAbstract Abstract Abstract Part library is an important part of CAD software．Thinking of that 3D graphic software having been used broadly nOW,an original system of 3D part library is researched and developed by author for mechanical product design，and which getting elementary success． 3D part library is a complicated system integrating various kinds of software techniques， including feature model，parameter driving and database technology,etc．Based on the fimctions analysis of 3D part library,the theory of parameter mapping style and relevant realization methods is emphatically discussed in this paper,the flow to set up parameter mapping in part library is given，the difficulties in dynamically amending parameter mapping is analyzed and the relevant solving methods are presented． During the design and development,the Object-Oriented modeling and design method ale adopted，which better solving the problem of various of parts and complicated relations in part library,SO as to make the structure clear,and available to organize and realize． There are six chapters in this paper：The first chapter is preface part,in which the developing status of and related techniques are introduced，and the main topic of this thesis is presented．The second chapter analyzes the function and requirement for part library．In the third chapteL the structure and whole scheme ale designed．In the form chapter,the specific realization methods are expounded and the key techniques are dis