冷成型钢构件插座式连接节点理论及试验-结构工程专业论文.docxVIP

ABSTRACTWelding，bolting，screwing ABSTRACT Welding，bolting，screwing and riveting are traditionally regarded as the most simple and practical styles of joint in steel construction．Accordingly,these traditional styles of connection are still adopted in the light gauge steel(LGS)structures that is widely applied day by day．To the development of one kind of structure，the significance ofjoint is self-evident． As cold—formed steel come forth．the farther development of LGS structure calls for the innovation of connection．Cold—formed steel has much unique characteristic as light，thin—wall， high·strength，and diversification of section，that causes bolting and riveting no longer be the most appropriate styles of joint in cold—formed steel structures．Aimed at the practical application of cold—formed steel elements with special section，here comes an ofiginative and more simple joint--Rosette-joint． The Rosette-joint is a completely new joining method for cold-formed steel structures． The Rosette-joint has several advantages over other common joining methods as mentioned before．Thejoint is formed using the parent metal ofthe sections to bejoined．Thus，there are no additional fixings，nor is there need for heating，which may cause damage to protective comings．nc connecting of joint Can finished rapidly and easily on·site using a special assisting t001．Quality is secured with no direct additional cost．Rosette-joint is well suit for the ideas ofLGS structure design． From year 1997-2000，The theoretical and practical research on Rosette-joint was carried on by the Laboratory of Steel Structures of Helsinki University of Technology in Finland，united with many other organizations．However,the present joint is limited to apply in small—gauge members，and has single style and low load capacity．So it Can not be effectively popularized in application+ On the basis offoreign research achievements，two kinds ofdomestic cold-formed steel sections are used as the parent materials to design Rosette-jo