圆锥螺母套零件数控加工工艺设计.docVIP

江苏财经职业技术学院 综合毕业实践说明书（论文） 标题： 圆锥螺母套零件数控加工工艺设计 系 别： 机电工程系 专 业： 数控技术 学 号： 0710401324 姓 名： 陈志刚 指导教师： 蒋素清 2010年4月16日 摘要： 本次设计主要是对数控加工工艺进行分析与圆锥螺母套零件图的加工，首先对数控加工工艺技术进行了简单的介绍，然后根据零件图进行数控加工分析。第一，根据本零件材料的加工工序、切削用量以及其他相关因素选用刀具及刀柄和零件的轮廓特点确定需要9把刀具分别为外圆粗车刀、外圆精车刀、外切槽刀、内螺纹刀、内镗孔刀、内切槽刀、93°左偏刀、93°右偏刀。第二，针对零件图图形进行编制程序，此零件为轴套类零件，外轮廓由直线、圆弧组成，零件的里面要镗出一个锥孔，在加工过程中，工件需要调头钻孔再镗孔，第三，早钻孔对刀时要先回参考点，要以孔中心作为对刀点，刀具的位置要以此来找正，使刀位点与换刀点重合。 关键字：刀具的确定 走刀路线的选择 刀具的对刀点 工件的定位 This design is mainly on the NC machining process analysis and set of parts drawing cone nut processing, machining technology first a brief introduction, and then plan for NC machining of parts. First, according to the parts of materials processing operations, cutting tools and other relevant factors and choose the outline of the handle and part characteristics identify nine tools were cylindrical rough turning, cylindrical precision turning, external grooving cutter , internal thread cutter, Boring tool within the inner notch cutter, 93 ° left side knife, 93 ° right-side knife. Second, for the part drawing graphics programming, this part for the sleeve parts, the outline of the straight line, arc composition, parts of which should be boring a tapered hole in the process, the workpiece needs another boring drilling U-turn, Third, the early drilling of the knife back when the first reference point, we should hole center point as a knife, cutting tool position to come to this is to make knife site coincides with the tool change point.?Tool to determine the choice of the cutting line on knife point tool positioning of the workpiece 目 录 第1章 绪论----------------------------------------------------------------------------------4 第2章 数控加工工艺----------------------------------------------------------------------5 2.1 数控加工工艺内容的选择---------------------------------------------------------5 2.2 数控加工工艺的主要内容---------------------------------------------------------5 第3章 圆锥螺母套加工-----------