冷弯薄壁C型钢组合梁柱加腋连接板节点试验研究-结构工程专业论文.docxVIP

重庆大学硕士学位论文中文摘要 重庆大学硕士学位论文 中文摘要 I I 摘 要 冷弯薄壁型钢作为轻质高强材料，由于其高结构性能，非常适合作为结构材 料。C 型钢在我国过去主要用于次构件；在北美及欧洲地区，冷成型钢则越来越多 的用作主要结构构件。冷成型钢作为主要结构构件，节点的连接方式多为螺栓连 接或自攻螺钉连接。加腋钢板连接由于构造简单，传力可靠，常用于梁柱连接节 点。该种连接虽具有承担一定弯矩的能力，但由于刚度较差、变形较大，实用上 常将其考虑为半刚性连接。 有关半刚性连接节点的弯矩?转角关系，国内外曾作过很多试验，在试验的基 础上也建立了一些数据库，但早期的工作主要集中在焊接或热轧的重型钢框架结 构，对冷弯薄壁型钢结构连接节点的研究则相对较少。本文选取了加腋钢板普通 螺栓连接冷弯薄壁 C 型钢组合梁柱节点作为试验研究对象，对节点的连接性能作 了三部分研究工作： ①进行了 5 个加腋连接板连接的冷弯薄壁 C 型组合钢梁、柱节点的试验，试 验针对连接节点的刚度即连接的 M-θ 曲线进行了测试。 ②着重研究了梁柱节点的破坏模式，板域的应力分布，不同厚度和形式的连 接板以及不同螺栓间距对连接节点的刚度、抗弯性能和破坏模式的影响。 ③通过与 5 个不加腋连接板梁柱节点的试验进行对比，分析加腋钢板对连接 节点的承载力、刚度等连接性能的影响，并对两组共 10 个构件的破坏模式和传递 弯矩性能作了对比分析。 关键词：C 型钢组合构件，加腋钢板连接，梁柱节点试验，破坏模式， M－θ 曲 线，半刚性，弯矩传递效率。 重庆大学硕士学位论文英文摘要 重庆大学硕士学位论文 英文摘要 II II ABSTRACT Cold-formed steel sections are lightweight materials and suitable for building construction owing to their high structural performance and durability. Cold-formed thin-walled C steel sections are widely used as secondary members in China, while in North American and European, they are widely used as main members. The connection of cold-formed steel sections are usually used bolt and Self-drilling screws, if Cold-formed thin-walled C steel sections are widely used as main members. The gusset plate with chamfers connection usually used in beam to column. In building construction, cold-formed steel sections are usually bolted to hot rolled steel plates or sections to form simple and moment connections. Much research and experiments has been reported in the literature on the development of Semi-rigid connections. It should be noted that most of the design recommendations on connections among cold-formed steel sections concern the load carrying capacities of individual fasteners. Little information on the structural performance of the bolted moment connections among cold-formed steel sections may be found in the literature. It is important to carry out physical tests to establish the use of moment connections between cold-formed steel sections. The experiments of thin-walled C