射频通信实验系统中发射机的设计与实现-通信与信息系统专业论文.docxVIP

武汉理工大学硕士学位论文Abstract 武汉理工大学硕士学位论文 Abstract With the arrival of“Information Age”，Radio Frequency technology has increasingly become the focus ofcommunication．It is urgently necessary t0 develop a laboratorial communication system of RF．because of increasingly lack of RF engineers．The system generally includes lra／15ceivfff equipments，antenna equipments(including feeder)，input and output equipments(such as speakers， headphones，ere．)，and power eqmpment(such as DC power)．The purpose of the paper is to solve the problem．The design and realization of the transmitter in RF communication labo舳dal system are presented． According to the analysis of transmitter solutions，the paper proposes a transmitter solution based on the PLL direct-frequency modulation．The design USeS discrete components and is divided into many independent modules according to the differem function,which has solved the eonflietioas between systematization and moduiarization in the RF communication laboratorial system．So the experimenters have an intuitionistie understanding to the radio frequency circuit and the theory．This plan combines the frequency synthesizer and the PLL in a module．which meets the performance requirements and greany reduces system complexity and cost．In order t0 reduce the influence of the temperature effect,the output of the PLL should be lowered．Therefore a pre—amplifier is placed in front ofthe power amplifier to achieve the input requirements ofthe power amplifier． The paper describes the hardware design ofthe two modules(the amplifiers and the PLL)．In the period of the design,the circuits ale simulated and optimized by ADS(Advanced Design System)．Based on the theory ofRF amplifier including gain, stability,non—linearity and bias network，the pre-amplifier and the power amplifier are realized by diserete components，using the ADS，according to the different performance requirement of pre·amplifier and the power amplifier．Using the advantage ofthe MBl5E03SL chip in PLL design．multi-c