桑树坪煤矿11号煤开采对其上3号煤影响研究-矿业工程专业论文.docxVIP

万方数据 万方数据 Subject ： Reach about the Impacts of No.11 Coal Seam Exploitation on Upper No.3 Coal Mine in the Mine of Sangshuping Specialty Name Instructor ： ： ： Mining Engineering Feng Bo (Signature) Zhang Enqiang (Signature) Jia Qilin (Signature) ABSTRACT Sangshuping coal mine is coal and gas outburst mine, minable seam is No. 2, No.3 and No.11 coal seam. The No.3 coal seam is the primary mineable coal seam which has the characteristics of thickness, three soft and high gas content .So it has great pressure on gas disaster prevention and control during mining. The government of measures gas regional was mining on the upper liberation layer in the past, meaning taking the No.2 coal seam as liberation layer with the unsatisfying effect on practical applications. In view of the No.11 coal seam on the bottom of the No.3, we consider that put the No.11 coal seam as the under-liberation layer of the No.3 coal seam. The layer spacing of no.3 and no.11 coal seam is 57~ 63 m, the average is 60.7 m. The 3105 working face which arrange in no.11 coal seam thickness is 1.8 ~ 3.5 m, the average is 2.65 m. Using all caving method treat gob. In order to understand the effect on no.11 after coal mining the no. 3 coal seam, mainly includes the situation of separation near the floor strata. Distribution of the “three zones” after the 3105 working face in mining, strata movement stability time after the mining. This paper adopts the method of field measurement and theoretical analysis, mainly through the monitoring system of the 3314 gas drainage lane which is between No. 3 and No.11 coal seam monitors the movement rule of overlying rock strata during the period of mining the 3105 working face. Through the analysis of data, combining relevant theories we draw that Caving zone for 10m to 16m, fissure zone for 47m to 52m , rock caving angle for 74°,the minimum layer spacing between No.3 and No.11 coal seam is 57m .So the no.3 coal locate at the curve subsidence zone . The maxi