eetop.cn_!FilterDesign and Tuning using CST Studio Suite（CST有关滤波器的仿真）.pdfVIP

Filter Design and Tuning using CST Studio Suite Abstract: Bandpass filters with small fractional bandwidths are quite challenging to design and tune. After reviewing various tuning techniques using CST Studio Suite a further approach to compute coupling factor bandwiths simultaneously is demonstrated. A combination of 3D and circuit models team up with new built in optimizers to efficiently tune bandpass filters. The new System and Assembly Modelling (SAM) in CST Studio Suite enables the interdisciplinary usage of coupled EM- Thermal- Structural and Sensitivity analyses within parameter-sweeps and optimization loops and is demonstrated on a simple test vehicle. Some accuracy considerations with respect to various meshing techniques conclude this presentation. Franz Hirtenfelder Applications Engineer CST Branch Office Munich Elsenheimer Strasse 55 D-80687 München (Munich) Germany Tel: +49 89 2420 828 101, Mob: +49 170 9160 110, Fax: +49 89 2420 828 198 Email: franz.hirtenfelder@, Web: CST – COMPUTER SIMULATION TECHNOLOGY | | May-12 Agenda Introduction Tuning Methods Solver selections, accuracy System Assembly and Modeling (SAM) Guidelines and Summary CST – COMPUTER SIMULATION TECHNOLOGY | | May-12 Introduction: Flow Chart Typical Flow Chart of the Filter design and Tuning process Dimensioning Specifications Circuit Design Analytical models Empirical adjustments 3D EM Simulation on the structure Measurements CST – COMPUTER SIMULATION TECHNOLOGY | | May-12 Introduction: from equations to a 3D model