美信公司有关SCDMA的架构.pdfVIP

Maxim App Notes WIRELESS, RF, AND CABLE Keywords: rf, rfic, wireless, td-scdma, evm, acir, acs, rf ics, rfics Mar 26, 2003 APPLICATION NOTE 1962 TD-SCDMA Reference Design V1.0 Abstract: This application note presents Maxims TD-SCDMA reference design V1.0. TD-SCDMA is the Chinese Third Generation (3G) standard. Chinas government has allocated 3 frequency bands: 1880~1920MHz, 2010~2025MHz, and 2300~2400MHz. Maxims TD-SCDMA reference design 1.0 focuses on the 2015~2025MHz band, which is the first frequency band for TD-SCDMA. Included are the block diagram, test results, PCB layout outlines and measured performance. Additional Information: Wireless Product Line Page Quick View Data Sheet for the MAX2306, MAX2308, MAX2309 Quick View Data Sheet for the MAX2361, MAX2363, MAX2365 Quick View Data Sheet for the MAX2470, MAX2471 Applications Technical Support Introduction TD-SCDMA (time division synchronous code division multiple access) is one of three 3G standards. The Chinese government recently (2002-10) allocated 155MHz of bandwidth for this standard. The TD-SCDMA standard now has three frequency bands: 1880~1920MHz, 2010~2025MHz, and 2300~2400MHz. Maxim currently produces many RF ICs that will operate in these frequency bands, and support the new standard, as is evidenced by the performance documented here. This document presents the performance of Maxims TD-SCDMA V1.0 (version one) reference design, and discusses the design specification and testing results. The full performance specification for the radio is documented by 3GPP (Third Generation Partnership Project) () in specification 25.945 V5.0.0. TD-SCDMA Reference Design Description The Maxim TD-SCDMA reference design Version 1.0 is a single-mode, single-band transceiver intended to support the TD-SCDMA standard. All active ICs in this reference design are from Maxim, except one PLL required due to