煤炭超高温制备石墨工艺及其设备研究-材料学专业论文.docxVIP

万方数据 万方数据 Subject :The research about process and equipment of coal prepare to graphite in the ultra high temperature Specialty : Materials Name : Yang Jia Qing (Signature) Instructor:Wang Xiao Gang (Signature) ABSTRACT In this article， a lot of information about the design of the high temperature furnace have been through access，determine the internal heating type ultra high temperature graphitization furnace using power， furnace type size and parameters such as power supply way according to the working principle of acheson sic smelting furnace， based on years of research work on the way of heat transfer in the furnace body and use characteristics are analyzed. On the shape and size of the furnace core adopts industrial acheson furnace surface load selection principle of selection; The selection of furnace insulation material and size based on the Fourier heat transfer law of multilayer wall review. Through the theoretical calculation and the simulation software Ansys is adopted to the working process of the furnace body， to simulate the temperature field on the basis of simulation parameters， designed and manufactured with internal ultra high temperature graphitization resistance furnace， and to come from the yunnan zhaotong region of ultrapure anthracite graphitization treatment. Design， manufacture and link design is demonstrated in that the internal heating type ultra high temperature graphitization stove has authenticity， reliability， practical and scientific. Furnace cost cheap， implementation is simpler， better economy. But the degree of furnace body integration， automation of water and higher temperature (above 3000 ℃ ) remains to be further raising the exploration and research. Respectively to put Yunnan zhaotong anthracite and shaanxi yulin coal ito high temperature heat treatment in 2000 ℃， ， 2200 ℃， 2400 ℃， 2600 ℃， 2800 ℃ and 3000 ℃. Then test and characterize the chemical composition， resistivity， microstructure， phase composition and internal f