ICEMCFD V10.0 入门教程教学课件.ppt

9/9/05 Inventory #002277 A1-* 许多曲线被过滤掉了 仅仅保留特征线 建立拓扑结构 选择 Geometry - Repair Geometry - Build Diagnostic Topology 在表面之间生成曲线，建立面之间的关系 单击Apply 复选 Filter Curves and Filter Points两项，再次Apply，结果如下图所示 #1 #2 注意: 网格会沿曲线分布 Display: Transparent Grey #1 #2 #3 #3 9/9/05 Inventory #002277 A1-* 表面网格尺寸 (选择) 设置表面参数 Mesh - Set Surface Mesh Size 单击选择表面图标，将鼠标移动到视图区域 单击“A”键选择所有表面 设置 Max element size = 1 Maximum deviation = 0.5 显示表面四面体大小 #1 #2 练习 练习选择, 选择与非选（左键/右键） 练习设置 Curve Mesh Size, 显示 Curve Node Spacing （线上点的分布) 查看 如何使用Parts对象名字来设置网格参数 找到 Global Mesh Size设置的地方 保存项目 显示: 透明、四面体大小 9/9/05 Inventory #002277 A1-* 生成四面体网格 生成四面体网格基本方法 Mesh - Volume Meshing - Tetra - From geometry（基于几何） 直接单击 Apply 调整设置查看网格的形式 曲线 、面/曲线网格参数和 全局网格参数用于提高网格质量或捕捉几何局部细节 #1 #2 练习 展开网格目录树，查看其选项 调整表面网格显示为 Solid Wire 尝试采用其他的显示方式 Dot nodes 重新建立拓扑（不过滤点和线），再生成网格 使用 smooth transition 选项划分网格 生成剖面- 鼠标在目录树上mesh右键，选择cut plane Mesh Display: Solid Wire 注意： 在不设置任何参数情况下，采用自动参数同样能生成四面体网格 9/9/05 Inventory #002277 A1-* 尝试编辑网格 尝试Edit Mesh 栏功能 Smooth the Mesh光滑 Check Mesh检查 Split劈分 Merge合并 等 另存文件 休息 * * * * Spend some time going around the room. This is a very important part of understanding what each student needs and expects from the course. It will allow you to tailor the course, or at least the emphasis you give certain topics. Remember names! Nametags would help here. * * * * Explain that emerging technology is trying to use the best of both worlds. * * The GUI is windows like in appearance and function. The main menu is in the top left corner. Below it are utility ICONS for more commonly used functions such as Save and Open, as well as measure tools and view controls such as zoom extents. The along the top right of the GUI are navigation tabs. These tabs are laid out from left to right in the order of a typical meshing process. Clicking on a tab brings its action icons to the fore front. Clicking on any of these icons will activate its Data Entry Panel. This snapshot shows the Smooth Elements Panel.