20t冶金起重机起升机构设计.docVIP

PAGE II 摘要 本文首先介绍了起重机的概念和分类，在国内外的发展概况，以及起重机的现代设计方法。接着对冶金起重机的特点、分类以及构造进行了详细的叙述。其中，本次设计的是冶金起重机小车的主起升机构，主起升机构的起重量大，是用以起吊重物的机构。它是冶金起重机的重要组成部分。本次设计的起升机构选用闭式的传动方案，在选用的半齿联轴器及带制动轮的半齿联轴器中用一根高速浮动轴联接，并且为了防止在运作中高速浮动轴突然断裂而制动不了卷筒，另外选用了制动器来制动卷筒；选择合适的减速器以及电动机等。 由于现代工业的迅速发展和国内外市场竞争的加剧，起重机在现代化生产过程中的应用越来越广，作用也越来越大，对起重机的要求也相应的越来越高了。因此起重机的设计方法需不断的充实、完善，使设计出的起重机更符合实际使用工况，更注重功能化、经济性和可靠性。 本次的毕业设计运用多种起重机的现代设计方法，特别是运用计算机辅助设计（CAD）的方法，在计算机上将冶金起重机起升机构的设计图纸CAD化，大大提高了设计的效率，节省时间。 关键词 冶金起重机；小车；起升机构；设计 Abstract This paper first introduces the concept of a crane and the crane’s classification, the developments at home and abroad, and the crane’s modern design methods. Then it describes in detail in the features、the classification and the structure of the bridge crane. In which, this time is designing the main hoisting mechanism of the small car of the bridge crane, the main hoisting mechanism from hoisting weights, which is used for hoisting heavy objects . It is an important component of the bridge crane. The design of the hoisting mechanism chooses the closed transmission programme, in the selection of the semi-gear coupling and the semi-gear coupling with break round using a high-speed floating-axis connection, and in order to prevent the operation of the high-speed floating-axis suddenly rupture that can not brake the reel, in addition to choose brakes to brake the reel； then chooses a suitable motor and reducer, and so on. Because of the rapid development of modern industry and the market competition intensifies at home and abroad, crane is used more widely in the modernization of the production process , the role of the crane is growing, also the corresponding requirements of the crane increase. So the design of the crane needs to constantly enrich and improve, that the designed crane can more meet the actual use conditions, and pay more attention to functional, economic and reliability of the crane. This graduation design uses a variety of the crane’s modern design methods, in particular th