大乌江公路隧道毕业设计.docVIP

本科毕业设计说明书 大乌江公路隧道施工组织设计 The Construction Organization Design of Dawujiang Tunnel 学院（部）： 土木建筑学院 专业班级： 学生姓名： 指导教师： 2009年 0 摘 要 本设计主要对大乌江公路隧道进行施工组织设计。首先对隧道进行了主体工程设计，其中包括隧道平面线形设计，隧道横纵断面设计，衬砌内轮廓和隧道长度等；并且对隧道复合式衬砌结构支护参数进行确定，包括锚杆直径长度、喷射混凝土厚度和二次衬砌厚度，并进行了相关的隧道衬砌结构力学计算。然后对隧道施工前的一系列准备工作进行了叙述。而后根据隧地质环境进行洞口及洞身的设计和施工，如针对钻眼爆破施工设计了炸药类型、炮眼直径、炮眼布置等，并且叙述了衬砌施工工艺。对该隧道施工过程中的监控和测量进行了相关设计，另外对隧道的附属设施工程施工也做了一定的设计，如防排水、供电照明和和路基路面工程等。 关键词：锚喷支护 ，二次衬砌 ，支护设计 ，光面爆破 ABSTRACT The design of Da Wujiang main highway tunnel construction organization design. First, the main tunnel engineering, including flat linear design of the tunnel, the tunnel cross-Profile design, lining and tunnel inside the contour length; and composite lining of the tunnel support structure to determine the parameters, including the bolt diameter, length, jet Concrete lining thickness and the thickness of the second, and related structural mechanics calculation of the tunnel lining. The tunnel and then a series of pre-construction preparations for a description. Geological environment and then carried out in accordance with the tunnel entrance and the hole body of the design and construction, such as eyes for the drilling of blasting explosives, the type of design, borehole diameter, such as blast-hole layout and lining process is described. Construction of the tunnel in the process of monitoring and measurement-related design, while the tunnel construction of ancillary facilities have also done a certain amount of design, such as anti-drainage, lighting and electricity supply and road works roadbed. Keywords: anchor bolting, second lining, supporting design, smooth blasting. 目 录 TOC \o 1-3 \h \z \u 摘 要 2 ABSTRACT 2 第一章 隧道设计概况 - 7 - 1.1工程概况 - 7 - 1.2工程环境条件 - 7 - 1.2.1地理和地形地貌 - 7 - 1.2.2气候、气温 - 7 - 1.3工程地质条件 - 7 - 1.3.1地层岩性 - 7 - 1.3.2地质构造 - 7 - 1.4水文地质条件 - 8 - 1.5隧道工程地质评价 - 8 - 1.5.1洞室围岩级别的划分 - 8 - 1.5.2隧道围岩稳定性评价