接头工艺规程及铣夹具设计.docVIP

PAGE Tianjin 毕 业 设 计 专 业：机械设计制造及其自动化 班级学号： 机自0603班 - 44 学生姓名： 张锐男 指导教师： 尚德香 副教授 二〇一〇年 六 月  天津职业技术师范大学本科生毕业设计 接头工艺规程及铣夹具设计 Joint process planning and milling fixture design 专业班级：机自0603班 学生姓名：张锐男 指导教师：尚德香 副教授 系 别：机械工程学院 2010 年 6 月 摘 要 本次设计主要是对接头零件编制加工工艺规程并设计铣床夹具。同时涉及到了进行夹具设计必需的毛坯选择、加工余量确定、切削刀具、机床选择及机动时间计算机等方面知识。本次设计内容包括两部分；首先是对接头零件的工艺分析，其次是针对接头零件的铣槽工序进行夹具体设计。本设计所选资料注意到贯彻最新国家标准及部分标准。 本次设计是根据生产纲领为大批量，年产量5000件左右设计的。设计中，考虑到大批生产，在加工过程中，为了保证被加工槽对其定位基准和尺寸精度和位置精度的要求，同时提高效率，对接头的铣槽工序进行夹具设计。设计采用气动夹紧，即以压缩空气为动力源以减轻工人的劳动强度，节省辅助时间，提高生产率。 关键词：毕业设计；零件工艺规程设计；工序设计；夹具设计 ABSTRACT This design mainly is draw up to work out the technological process of the attachment and design mill jig . Involve in the meantime to carry on an essential semi-finished product choice of the tongs design,process an amount of remaining assurance,slice to pare knife to have,aspect knowledges such as the tool machine choice and mobile time calculator etc.. This design contents includes two parts;the first parts of the attachment of the process analysis, followed parts is in view of milling working procedure for specific folders. Noted that the design selected information and implement national standards and some of the latest standards. The design is based on the Program for the production of bulk into an annual output of about 5000 design. Design, taking into account the large number of production, during processing, in order to ensure processing the trough location and size of its precision and accuracy requirements of position, at the same time improve the efficiency of design process. Using pneumatic jig to reduce labor intensity, time-saving aids to improve productivity. Key Words：The graduation design; The technological process of the spare parts; Working procedure design; Jig design PAGE II 目 录 TOC \o 1-4 \u 1绪论 1 1.1设计的目的 1 1.2设计任务及要求 1 1.3设计的内容及步骤 1 1.3.1工艺规程的设计 1 1.3.2专用夹具设计 2 2零件加工工艺规程的制定 4 2.1零件的分析 4 2.1.1零件的工艺分析 4 2.2 零件的工艺规程 4 2.2.1确定零件的生产纲领 4 2.2