材料成型及控制工程专业英语---8-CAD-CAM.pptVIP

Question （p109） Question （p113） Question （p116） - * - 8.4 solid freeform fabrication (SFF) methods 快速原型制造方法 In that year, stereolithography (SLA) was first introduced by 3D Systems Inc., and over the next five years several rival methods also appeared. This created the family of processes known as solid freeform fabrication (SFF). SFF processes are sometimes described as: 立体层叠扫描首次有3D系统公司发明。在其后的5年里，相继出现了其它几种具有竞争性的方法。快速原型制造工艺由此建立。SFE工艺有时被描述为： Assortment 混合物 ；分类 - * - 8.4 solid freeform fabrication (SFF) methods Parts on demand From part to part Desktop manufacturing Rapid prototyping 所需零件 从一个零件到另一个零件 桌面制造 快速原型设计 Assortment 混合物 ；分类 - * - 8.4 .3 Laminated object modeling (LOM) 层压制模 Laminated object modeling（LOM）was developed by Helisys Inc., and like SLA and SLS, it was first offered commercially in the period from 1987 to 1990. LOM 由Helisys公司开发，SLA和SLS也由他们与1987-1990年期间首先提供商用（产品）。 - * - 8.4 .3 Laminated object modeling (LOM) 层压制模 In LOM , the laser is used to cut the top slice of a stack of paper that is progressively glued together. 在LOM 中，激光用来切割纸剁表层的纸。这些纸逐渐用胶水粘在一起。 - * - 8.4 .3 Laminated object modeling (LOM) 层压制模 After each profile has been cut by the laser (Fig.8.3), the roll of paper is advanced, a new layer is glued onto the stack, and the process is repeated. 纸上每一个轮廓被激光切割出后，纸轴向前滚动，新一层的纸又粘在纸剁上，重复这一过程。 - * - 8.4 .3 Laminated object modeling (LOM) 层压制模 After fabrication, some trimming, hand finishing, and curing are needed. For larger components, especially in the automobile industry, LOM is often preferred over the SLA or SLS processed. 制造好后，需要进行部分修剪、手工抛光和固化。对于大些的零件，特别是汽车工业中（的零件），LOM经常由于SLA和SLS工艺。 * question * * * 頁眉 * 頁眉 * 頁眉 * 2009 ? Hisuntech Corp. 材料成型及控制工程专业英语 上海工程技术大学 材料学院 CHAPTER 8 CAD/CAM 8.1 Computer-aided Design and Computer-aided Manufacturing Words and terms - * - - * - 8.1 Computer-aided Design and Computer-aided Manufacturing Throughout the history of our industrial society, many inventions have been patented and whole new technologies