新拌及硬固混凝土水溶性氯离子含量检测之研究.doc

新拌及硬固混凝土水溶性氯离子含量检测之研究.doc

  1. 1、本文档共3页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
新拌及硬固混凝土水溶性氯離子含量檢測之研究 Study on the Water-Soluble Choride Ion Contents in Fresh and Harden Concretes 研究生:蕭尚岳 Hsiao, Shang-Yueh 指導教授:吳志興 Wu, Chi-Hsing 【摘要】 本研究設計0.06、0.121、0.272、0.483 kg/m3等四種不同氯離子含量之新拌和不同齡期硬固混凝土試體,依據CNS 13465之硝酸銀滴定法、電子式氯離子量測法及CNS 14703之微電位計滴定法,分別量測其氯離子含量,比較三法之準確性,其中水溶液之氯離子含量之檢測亦比較之。 試驗結果顯示,量測氯離子水溶液準確性最佳為硝酸銀滴定法,平均誤差百分比為4.77%。量測新拌混凝土氯離子含量乃依據CNS 13465中之前處理步驟,結果以電子式氯離子量測法為最佳,硝酸銀滴定法次之,平均誤差百分各為29.7%、39.2%,恰為規範所提示之方法。量測硬固混凝土氯離子含量乃依據CNS 14703中之前處理步驟,結果以硝酸銀滴定法為最佳,平均誤差百分比為8.6%,與規範所提之微電位計滴定法不同,但氯離子含量大於0.4 kg/m3時,不論誤差值或誤差百分比皆顯示微電位計滴定法為最佳。另外,硬固混凝土中氯離子含量可能隨養護水流失,其隨著養護時間增長而遞減。 關鍵字:氯離子含量、新拌混凝土、硬固混凝土、硝酸銀滴定法、微電位計滴定法 【Abstract】 The study designed several fresh concrete specimens and harden concrete specimens of different ages, which including four different chloride ion contents of 0.06, 0.121, 0.272, and 0.483 kg/m3. According to the silver nitrate titration method and the electronic instrument method of CNS 13465 as well as the potentiometer titration method of CNS 14703, the chloride ion contents of specimens were measured by each method to compare the accuracy of these three methods. The chloride ion contents of water solution measured by these three methods were also compared. The test results show that, the silver nitrate titration method has the best accuracy in measuring chloride ion content of water solution. The average error percentage is 4.77%. The pre-process steps for the chloride ion content measurement of fresh concrete is that in CNS 13465. As a result, the measurement by the electronic measurement method is the best. The silver nitrate titration method is the second best. The average error percentages are 29.7% and 39.2% respectively. The result is accordance with that in CNS 13465. The pre-process steps for the chloride ion content measurement of harden concrete is that in CNS 14703. The measurement by the silver nitrate titration method is the best. The average error percentage is 8.6%. The result is not accordance with that in CNS 1

文档评论(0)

xiaozu + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档