销售工程师培训材料-疲劳试验.pptx

FATIGUE TESTS;Introduction to fatigue Types of fatigue tests: Four-Point Bend Two-Point Bend Three-Point Bend Indirect Tensile Test Uniaxial Fatigue Conclusions Questions ;Fatigue is the weakening or reduction in strength of a material due to repeated/cyclic/fluctuating loads or stresses. ;One of the most common failure modes of asphalt pavements. It can be measured by bending, direct and indirect tensile methods. Loading is usually sinusoidal or some other form of controlled loading. Results from two different test methods are not necessarily comparable. ;;;;Two-Point Bend: EN 12697-24A, E