成品检验标准(电子玩具).docVIP

成品检验标准(电子玩具 1. 目的 These criteria specify the acceptance inspection for finished good in the OEM factory in order to maintain andassure the qualityrequired in market at the time of production and delivery of TAKARA brand products.(Electronic toy item 为了保证生产和交付的TAKARA牌产品(电子玩具质量符合市场上所要求的标准, 这些标准详细说明了OEM工厂成品的检验. 2. SCOPE OF APPLICATION These criteria are applied to the acceptance inspection as quality judgment criteria for finished goodwhich produced by OEM factory. However, if there is any doubt occurs within productstandardof individual model, this Acceptance Inspection Criteria for Finished Good and each establishedoperation criteria as below,priority shall be given toproduct standard of individual model. Classification Of Defects Operation Criterion Measurement Test Operation Criterion Product Safety EMC Test Operation Criterion Assembly Inspection Operation Criterion Dismantle Test Operation Criterion Reliability Test Operation Criterion First Piece Confirmation Operation Criterion Production Line Defective Confirmation Operation Criterion 2. 运用范围: 这些标准用于對OEM工厂生產的成品進行檢驗時作為質量判斷標準. 但是, 如果在個別樣板標準, 這個成品檢驗標準, 和下列的實施標準產生沖突, 樣板的標準享有優先權. 缺陷分類實施標準 測試實施標準 產品安全和EMC測試實施標準 組裝檢驗實施標準 拆卸測試實施標準 可靠性測試實施標準 首件确認實施標準 生產線上次品确認實施標準 3. DEFINITION Inspection Test The inspection and test for product acceptanceinspection is defined as follows: General Inspection (Done by TAKARAQC Conduct confirmation on appearance, structure and function. Accessories Inspection (Done by TAKARAQC Conduct confirmation on actual usage connection condition and function. Packing Inspection (Done by TAKARAQC Conduct confirmation on gift box, outer carton, printing indication, cushion material, etc. First Piece Confirmation (Done by both TAKARA QC and factory QC Conduct confirmation on operational check accordance with instruction booklet and thecompleteness accordance with product specification. 3. 定義 3-1 檢驗和測試 產品的檢驗和測試定義如下: 一般檢驗(在工廠QC檢驗通過後由TAKARA公司的QC進行 确認產品的外觀, 結構, 和功能 附件檢驗(在工廠Q