隔离型DC-DC直流转换器.doc

ipDCIS Isolated DC-DC Converter Description ipDCIS series isolated DC/DC converter applies advanced technology and is configured specifically for electric vehicles. It is very suitable to supply power to the lamp and audio system as it is very stable and clean. The advantages of high efficiency, stability and compact size, are achieved by adopting the advanced high frequency technology. It is sealed by silica glue to get water and vibration proof, which ensures the stability of the vehicle in atrocious condition. It also can be used as a charger to charge the 24V battery in the electric automobile according to the requirement. Current equalizer is built in, which makes converters work in parallel in order to enlarge the capability. Some DC/DC converters modules can be used in parallel directly to increase current. Specifications Input Voltage: 70V~140V DC Output Voltage: 24.0V at 15 Maximum Efficiency: no less than 90% Environmental Enclosure: IP68 Shock and Vibration: SAEJ1378 Safety-North America: UL2202/UL1564 2nd Edition Emissions- North America: FCC Part 15/ICES 003 Class A Immunity-Europe: EN61000-4-2 Operating Temperature:-20 Celsius degree to +50 Celsius degree(-22-122) Protections Water and Vibration Proofed: All sealed by silica glue to get water and vibration proof, which is suitable for all kinds of condition. Input reverse polarity protection: Shut down, auto-reset. Water Proofed Fuse: Input or output fuse, simple wiring. No Arc: Input with no arc, can be controlled by key switch directly, without contactor Short Circuit: Shut down with little pulse current, auto-reset, ensure the wire safety. Overheating Cutback: Reduce output current if the temperature is over 65 Celsius degree, ensure the continuous power for your car. Input Reverse Polarity: Electronic protection, auto-reset. Input Low Protection: Shut down, auto-reset, prevent the battery from over discharging Type Table Type Battery Output Voltage Outpu