交通灯十字路口控制器程序.docVIP

#includereg52.h #define uchar unsigned char #define uint unsigned int uchar code table[]={ 0x3f,0x06,0x5b,0x4f, 0x66,0x6d,0x7d,0x07, 0x7f,0x6f,0x40 }; //*************digit display port******* sbit led_w1=P1^1; sbit led_w2=P1^0; sbit led_w3=P1^3; sbit led_w4=P1^2; //*****define led port ********** sbit R1=P2^4; //east and west red led sbit Y1=P2^3; //east and west yellow led sbit G1=P2^2; //east and west green led sbit R2=P2^5; //south and north red led sbit Y2=P2^6; //south and north yellow led sbit G2=P2^7; //south and north green led //*********define key************** sbit k0=P3^0; //emergency sbit k1=P3^1; //east and west pass sbit k2=P3^2; //south and north pass sbit k3=P3^3; //start and subtract 1 sbit k4=P3^4; //pause and add 1 sbit k5=P3^5; //set time //*********define variable********* bit flag,flag_t; uchar dx_time,nb_time; uchar cnt,pass_time,cnt1,y_time; uchar k0num,k1num,k2num,k3num,k4num,k5num; //*********define key******** void delay(uint i) { uint x,y; for(x=i;x0;x--) for(y=110;y0;y--); } void timer0_init() { TMOD=0x11; TH0=(65536-50000)/256; TL0=(65536-50000)%256; TH1=(65536-50000)/256; TL1=(65536-50000)%256; EA=1; ET0=1; ET1=1; } void led_display(uchar dx,nb) { uchar dx1,dx2,nb1,nb2; dx2=dx/10; dx1=dx%10; nb2=nb/10; nb1=nb%10; if(dx99) { led_w1=1; led_w2=1; } else { led_w1=0; P0=table[dx1]; delay(5); led_w1=1; if(dx10dx0) led_w2=1; else { led_w2=0; P0=table[dx2]; delay(5); led_w2=1; } } if(nb99) { led_w3=1; led_w4=1; } else { led_w3=0; P0=table[nb1]; delay(5); led_w3=3; if(nb10nb0) led_w4=1; else { led_w4=0; P0=table[nb2]; delay(5); led_w4=4; } } } //*************light work********** void circle_led() { if(!flag) { if(pass_time5) { led_display(pass_time-5,pass_time); R1=1;Y1=1;G1=0; //east and west pass R2=0;Y2=1;G2=1; //south and north stop } if(pass_time=5pass_time0) { if(cnt=10) led_display(pass_time,pass