WS_ACOUSTICS_2b_Ski_Cabin_Modal_Extraction英文文献资料.pdfVIP

Workshop 2b – Modal Extraction of a Ski Cabin Cavity Actran Training – ACOUSTICS FFT MSC Software 1 Confidential Introduction • PRE-REQUISITES - before going through this presentation, the reader should have read and understood the following presentations: – Theory Acoustics : General Program Organization – Theory Acoustics : Acoustic Simulations • The OBJECTIVES of this workshop are the following: – Get introduced to the modal extraction – Compare the cavity modal behavior with results got previously in Direct FFT MSC Software 2 Confidential Workshop Description • Ski cabins can be considered as closed acoustic systems which are subjected to various noise sources, mainly due to the cabin structure • An acoustic excitation is applied at the ceiling location to generate noise inside the cabin • The objective of this workshop is: – To characterize the modal behavior of the cabin using an extraction of its normal modes – To evaluate the SPL at the skiers ear for a typical ceiling excitation using a modal frequency response (this is done in the Workshop_ACOUSTICS_2c) FFT MSC Software 3 Confidential Workshop Strategy • The cabin is assumed rigid at its boundary, only the acoustic part is modeled  A finite fluid component is defined • Modal extraction is only suitable for real system (no imaginary part). Therefore, the model can not include damping mechanisms. These parameters could be included during the frequency response sequence. FFT MSC Software 4 Confidential Mesh Requirements • Following linear element set is necessary for the modal extraction: – One 3D e