电气工程及其自动化专业【毕业设计 文献综述 开题报告】永磁同步电动机功率因数的仿真分析--转矩电流最大比控制模型.doc

电气工程及其自动化专业【毕业设计+文献综述+开题报告】永磁同步电动机功率因数的仿真分析--转矩电流最大比控制模型 （20_ _届） 本科毕业设计 永磁同步电动机功率因数的仿真分析--转矩电流最大比控制模型 摘 要 永磁步电动机以其体积小效率高、功率密度大等优点而成为最具竞争力电机目前已得到了广泛的应用为了实现优良的PMSM控制系统，不少学者将先进的控制理论应用于交流伺服系统并取得了很好的控制效果功率因数和效率一样都是永磁同电动机最具实用价值的特征指标。无论是异步起动的永磁电动机，还是调速永磁电机，设计时都力求提高其功率因数。 关键词：永磁同步电动机，功率因数，转矩电流最大比，控制理论 Permanent magnet synchronous motor power factor of the simulation--the imum ratio of torque current control model Abstract Permanent magnet synchronous motor with its small size，high efficiency，power density，etc. and become the most competitive motor，has been widely used。 In order to achieve good control system of PMSM，many scholars of advanced control theory is applied to servo system，and achieved a good result。Power factor and efficiency，are both permanent magnet motor with the characteristics of the most practical indicators。Both asynchronous permanent magnet starter motor, or speed permanent magnet motor, the design will strive to improve the power factor。High power factor is a prominent permanent magnet synchronous motor advantages, it helps reduce the stator current and the winding copper loss, improve efficiency, make the permanent magnet synchronous motor asynchronous motor has a much higher than the power index。This paper will make a detail analysis of the power factor of the permanent magnet synchronous motor and power factor control strategy is proposed。 First, in the dq coordinate system to establish the mathematical model of permanent magnet synchronous motor, in the MATLAB / SIMULINK to create simulation model of permanent magnet synchronous motor for its power and power factor of excitation conditions。 Secondly, in the MATLAB / SIMULINK to establish a imum ratio of torque current control simulation model, by controlling the stator current vector angle to control the torque, and analyzed under different conditions of permanent magnet synchronous motor power factor。 Finally, a permanent magnet synchronous motor power factor of the si