级进模具设计.docVIP

电子元件外壳基座片级进模设计 第 PAGE 1页 共53页 摘要 本次设计题目是电子元件基座片模具设计，制件来源于电子元器件。其基座片零件上需冲制三个孔、拉深以及翻边。通过对该零件的连续模具设计，掌握一般连续冲压模具的设计方法、特点和成型过程。连续模的特点是冲压生产效率高、操作安全简单、生产成本较低、产品质量高。本设计详细介绍了连续模的排样方式、总体设计、零部件的设计以及工艺参数的选择计算。注意设计当中的某些细节问题，了解冲压模具结构及工作原理；通过对pro/e、AutoCAD的应用，从而有效的提高工作效率。 通过查阅了模架的基本类型，分析了级进模的模架技术要求，介绍了标准模架的装配工艺。并指出了模架装配时的注意事项。冲裁侧刃是模具中的重要工序，其冲裁形状和凸、凹模结构对生产质量影响很大。侧刃设计的正确性与标准化既有利于模具维修的规范化，也为整个模具的顺利生产打下了一个良好的基础。 关键词：基座片、连续模、成型、pro/e、AutoCAD、冲模模架、装配工艺 Abstract The design is the subject of progressive die base film design and parts from electronic components. Its base on-chip components to be three-hole punching , deep drawing and flanging. Through the components for mold design, master general for stamping die design, characteristics and work process. Die Stamping production is characterized by high efficiency and safe operation of simple, low production costs, high product quality. The detailed design of the layout of the die, design, components and the design parameters of the choice of terms. Attention to the design of certain details of the understanding of stamping die structure and working principle through the application of AutoCAD, so as to effectively enhance the work efficiency. Through has consulted pouch frames fundamental type, analyzed the level to enter molds pouch frame specification, introduced the standard pouch frames assembly technique. And had pointed out the pouch frame assembles when matters needing attention. The blanking side edge is in molds important working procedure, its blanking shape and raised, the lower die structure is very big to the production quality influence. The side edge designs accuracy and the standardization are already advantageous the standardization which services in the mold, also has built a good foundation for the entire molds smooth production. Keyword：Base film 、Progressive die、Forming、Pro/e、AutoCAD、The model puts up a die；Assembling handicraft 第一章 绪 论 1.1冲压技术的应用和特点 冲压加工是利用安装在压力机上的模具，对在模具里的板料施加变形力，使板料在模具里产生变形，从而获得一定形状、尺寸和性能的