百威纯生330玻瓶图纸.doc

1. Heel/Bottom Plate Lettering Requirements: A) “B” to appear in a straight line on one side of the heel as shown round nosed style raised .3 maximum in glass. B) “NO REFILL” in Chinese characters to appear on heel. C) Factory letter, year date, cavity # and trademark to appear on the heel sufficiently separated from the legend statements. D) Emhart Dot Code-The code dots may be used on the heel. No glass to glass contact of the lettering or dots will occur when two bottles are placed together and rotated. E) No lettering of any kind on the bottom plate without brewery approval. 2. Embossed front body deco. to appear centered between the parting lines in the recessed label panel as shown raised .3 in glass. 3. One AEagle logo to appear on the shoulder centered above label panel embossing as shown raised .4 max. in glass. 4. No glass to glass contact of label panel embossing will occur. 5. A spotter ramp to be used for label registration as shown, centered opposite the front embossing. 6. Crescent knurling or bar knurling to appear on bearing surface. 7. Note: Target overflow is 347.5 ml. 8. Out-Of-Perpendicular-Bottles will not deviate from the perpendicular for any reason(s) more than 4.8 when rotated 360° measured at the finish. 9. Drawing is not to scale. All dimensions are expressed in millimeters. Reference Glass Weight: 275.0 grams Standard Capacity at Fill Point: 330.00 ml +/-4.44 ml Average Capacity at Fill Point: 330.00 ml +/-1 ml Zone Technical Development--China 330 ml Bud Draft NR - China Specification: Date: I-C-237-D 11/10/2009 Page 1 of 3 Pages 330BD1.DWG 1. Proper application and function of the closure requires that variations in the other diameters of the locking ring should follow those of A subject to such variations as normal manufacturing conditions require. This applies to the locking ring profile shown which is considered ideal. 2. It is important that the C dimension at the top of the opening adjacent to the