百威纯生580玻瓶图纸.docVIP

1. Heel/Bottom Plate Lettering Requirements: A) “B” to appear in a straight line on one side of the heel as shown round nosed style raised .3 maximum in glass. B) Factory letter, year date, cavity # and trademark to appear on the heel sufficiently separated from the legend statements. C) Emhart Dot Code-The code dots may be used on the heel. No glass to glass contact of the lettering or dots will occur when two bottles are placed together and rotated. D) No lettering of any kind on the bottom plate without brewery approval. 2. Embossed front body deco. to appear centered between the parting lines in the recessed label panel as shown raised .3 in glass. 3. No glass to glass contact of label panel embossing will occur. 4. A spotter ramp to be used for label registration as shown, centered opposite the front embossing. 5. Crescent knurling or bar knurling to appear on bearing surface. 6. Out-Of-Perpendicular-Bottles will not deviate from the perpendicular for any reason(s) more than 4.8 when rotated 360° measured at the finish. 7. Drawing is not to scale. All dimensions are expressed in millimeters. Reference Glass Weight: 495.0 grams Standard Overflow: 605.0 +/-5.8 ml Average Capacity at Fill Point 580.0+/- 1.5 ml Zone Technical Development--China 580 ml Bud Draft TR - China Specification: Date: I-C-239-F 7/24/2010 Page 1 of 2 Pages 580BD.DWG 文件更新记录 日期 作者 版本说明 自前一版本以来的主要的或重要的变更 2009-11-10 侯春毅 作为百威品牌，沿用原AB的图纸，但对灌装容量的均值公差要求为+/-1ml，单瓶公差要求为+/- 5.8ml。 2010-7-24 侯春毅 根据百威英博通用标准的更新，将平均灌装容量公差要求由580+/- 1ml改为580+/-1.5ml。 Page 2 of 2 Pages