MP3播放器的设计.docVIP

PAGE PAGE II 摘 要 随着信息化、智能化、网络化的发展，嵌入式系统技术也随之提高，它的应用也越来越广泛。同时现在基于ARM-Linux嵌入式MP3播放器的设计是比较流行的一种设计，它能够很好的节约成本，而且使用方便便于携带。因此，有很好的发展前景。 本文提出了一种基于嵌入式ARM处理器硬件平台的MP3播放器设计方法。此播放器采用ARM体系结构中的ARM9作为系统控制器,利用外围设备USB通用串行接口下载MP3歌曲,用flashcard存贮MP3文件。用UML描述了嵌入式MP3播放器界面的开发过程。主要对MP3做了各个方面的功能分析，对硬件设计、软件设计、软件实现、系统编译、移植等方面做了介绍。 系统的主要部分是音频编码与解码，这是系统设计的核心。MP3播放器设计的突出问题就是硬件控制和软件控制，另外还有硬盘控制、键盘控制、液晶显示，这些控制都是基于一块芯片。基于ARM的MP3播放器设计的软件体系结构采用分层模式，它包括软件层、硬件层、驱动层、操作系统层、及MP3播放器应用层。 本文从软件的分层介绍和硬件集成入手，利用了嵌入式系统软硬件一体化，可裁剪性，适用于应用系统。基于S3C2410的系统硬件设计平台，利用Linux操作系统对S3C2410处理器的支持来介绍MP3播放器的设计。 关键词：播放器，高级精简处理器，嵌入式，操作系统，音频编码与解码 Abstract With the information, intelligence, network-based development, embedded systems technology have also improved its application has become increasingly widespread. At the same time, now the embedded ARM-Linux-based MP3 player design is more and more popular design, it can save the cost and easy to carry and easy to use. Therefore, it is a very good development prospects. In this paper, a processor based on ARM embedded hardware platform MP3 player design. The use of this player in the ARM architecture ARM9 system controller, as the use of USB peripherals, a Universal Serial Interface to download MP3 songs, MP3 files using flashcard storage. Use UML to describe the embedded MP3 player interface development process. MP3 mainly done on various aspects of functional analysis, hardware design, software design, software implementation, the system compiler, transplant, etc. is introduced. The main part is the audio encoding and decoding, which is the core of system design. MP3 player is designed to highlight the issue of hardware control and software control, as well as the hard disk control, keyboard control, liquid crystal display, these controls are based on a single chip. ARM-based MP3 player in the software architecture design using hierarchical model, which includes the software layer, hardware layer, layer drive, operating system layer, and the MP3 player application layer. In