肖家坳隧道工程设计.pdfVIP

肖家坳隧道工程设计 摘要 肖家坳隧道由左右分离的两座隧道组成，经过前期地质勘察所取得的材料，对肖家 坳隧道进行了设计。总体设计中包括隧道位置选择、线路设计与横断面设计，紧接着经 过方案比选采用削竹式隧道洞门。衬砌结构设计这一块按照规范取值，采用直刚法进行 验算，验算结果可靠。隧道排防水、照明与通风设计均按照规范取值验算。本设计专题部 分是隧道施工设计，由围岩等级等因素本设计Ⅲ级围岩采用全断面开挖施工法、Ⅳ级围 岩采用台阶法开挖，以超前锚杆施工为 助施工方法。监控测量主要包括监控内容与监 控方法的选择，其中应注意运营阶段的监控测量不能忽略。 关键词：肖家坳隧道；总体设计；衬砌；全断面开挖；监控测量 XIAO JIA AO TUNNEL ENGINEERING DESIGN ABSTRACT Xiao Jia Ao tunnel is consisted of two separated tunnels around the composition. after the early geological survey made materials of Xiao Pass tunnel design. Overall design including the tunnel location selection, circuit design and cross-sectional design, followed by cutting through the scheme comparison using bamboo Tunnel Portal. This is a follow lining structure design specification values, using the straight method just checking, checking results are reliable. Tunnel row waterproof, lighting and ventilation are designed in accordance with the specification value checking. This design is part of tunnel construction project designed by factors such as the design of rock grade Ⅲgrade rock with full face excavation construction method, Ⅳgrade rock excavation step method used to advance the construction of the auxiliary bolt construction methods. Monitoring includes monitoring content measurement and monitoring method of choice, which should be taken to monitor the operational phase measurement can not be ignored. Keywords: Xiao Jia Ao tunnel; overall design; lining; whole section excavation; monitoring measurements 目 录 第一章 绪论1 1.1 工程概况1 1.2 隧道工程地质概况1 1.2.1 地形地貌1 1.2.2 地层岩性1 1.2.3 水文地质条件2 1.3 工程地质评价2 1.3.1 区域稳定性评价2 1.3.2 隧道围岩工程地质评价2 1.3.3 有害气体评价3 1.3.4 隧道水文地质评价3 1