gb2027b泉州市天益机电80.pdfVIP

® VICKERS ® SystemStak Valves ISO 4401-03; NFPA-D03; 315 bar (4500 psi); 60 L/min (15.7 USgpm) GB 2027B 1 Build a Compact, Cost-Effective, Reliable Hydraulic System with Vickers SystemStak Valves Reduces System Space SystemStak Systems... Easy to Requirements Understand, Easy to Design SystemStak valves make compact SystemStak circuitry is best shown hydraulic systems in which specific using slightly different symbols than function valves are “sandwich” mounted those for traditional valve configurations. between a directional valve and a Each SystemStak symbol has the same standard mounting surface. basic form and size as shown in fig. 1. Reduce Cost SystemStak valves eliminate intervalve piping and leak-prone tube and pipe connections. Installed cost is less than when using conventional valves. P T B A Versatile and Easy to Install SystemStak valves have all the internal Figure 1 passages necessary to serve the directional valve topping them. Mounting surfaces and port patterns are to P T B A international standards: any valve conforming to ISO 4401 size 03; P T B A ANSI/B93.7M size D03; NFPA-D03; Figure 4 CETOP 3; and DIN 24340, NG6 Figure 2 mounting interface can be used with Relief valves should normally be these SystemStak valves.