gb2094a泉州市天益机电27.pdfVIP

Vickers® Amplifier Cards Command Signal Generator Card EEA-DSG-450-A-10 Series General Description Features and Benefits Operating Data This card is used to generate input – The polarity of all five command Supply voltage . . . . . . . . . 15V 5%, signals for open and closed loop signals can be changed using x 50 mA max. electro-hydraulic control systems. In soldered links. Impedance of addition to internally applying the – The summing amplifier is provided potentiometer P1 to P5 . . . . . . . . . . 2 kΩ command signals which can be set on with an additional input for cascading No. of command signal relays . . . . . . . 5 the card, it can be used for driving several cards. Relay voltage . . . . . . . . . . . 24V 20%, external command potentiometers; the – The amplifier has an inverting and a approx. 30 mA per relay internal potentiometers can then be non-inverting output. Male connector . . . . . . . DIN 41612, D32 used to limit the range of adjustment. – The status of the relevant command Mass . . . . . . . . . . . . . . . 0,15 kg (0.33 lb) signal is indicated on the front panel by LEDs. Connection Diagram EEA-DSG-450-A-10 +15V c4 +10V a28 +10V –10V 0,315A 19V A