gb2137c泉州市天益机电34.pdfVIP

Vickers® Valves Power Amplifier Type EEA-PAM-513-A; 14 Design For KCG-3, 10 Series Proportional Pressure Control Valves General Description Features New 14-design Features Wider supply voltage range plus The power amplifier has five voltage User-friendly front panel with all the increased tolerance to ripple inputs (one inverting) and a current input necessary adjustments, LEDs and Low supply voltage protection for 0-20 mA. The “set minimum” and monitor points Additional monitor points on edge “gain” adjustments allow the amplifier to Electronic overload protection with connector be easily tuned to the proportional automatic reset pressure control valve. The ramp Pulse width modulation for high Gain re-positioned in circuitry to give: potentiometer on the front panel efficiency Ramp setting unaffected by gain simultaneously adjusts the output Ramp function generator for control of adjustment acceleration and deceleration. The ramp pressure increase and decrease rates Constant trigger voltage for deadband function is normally enabled; it can be 24V DC power supply compensation permanently disabled by an external Either current or voltage input signals wire link, or selectively enabled/disabled Standard input and output signals using a remotely located switch. Monitor points on the front panel allow measurement of the co