gb2122d泉州市天益机电33.pdfVIP

Vickers® Accessories Switching Power Plug For Use with Solenoid Operated Valves Rated up to 24V DC EHH-AMP-702-A; 2* Series General Description This plug is basically a remote controlled Electrical Block Diagram on/off switch. When compared with switching relays, it gives more Power input consistent valve response times and + reduced de-energizing times. Command C Load Conforming to ISO 4400 (DIN 43650) signal input interface, it has a built-in amplifier that – enables the switching control signal for 0V hydraulic and other types of on/off valves to be taken directly to the valve solenoid, instead of via a control cabinet relay. Model Codes Features and Benefits EHH-AMP-702-A - 2* Improved control reliability. Faster, more consistent load 1 2 switching. Smaller, cooler system control cabinets. Low electrically generated noise. 1 Type of switch Simpler, cost effective wiring of the A = Direct switching of power supply application. LED indicates “switched on”. 2 Design number, 20 series Same connection interface as Subject to change. conventional ISO 4400 (DIN 43650) Installation dimensions unaltered for plug. design numbers 20 to 29 inclusive. Protection to IP67, This product has been designed and tested to meet specific standards outlined in the European Electromagnetic Compatibility