面向生产工序的钢铁企业能耗建模研究与应用.docVIP

同济大学 硕士学位论文 摘要 PAGE I 硕士学位论文 面向生产工序的钢铁企业能耗建模研究与应用 面向生产工序的钢铁企业 能耗建模研究与应用 摘要 由于能源资源的日趋紧张和工业发展所需能耗的日益增加，人们越来越重视对能源的合理使用。作为工业能耗大户的钢铁企业，也把能源管理问题视为重点。能耗建模作为能源管理的基础和分析工具，对节能减排有重要意义。 本文旨在对面向生产工序的钢铁企业能耗建模作相关研究，并设计与开发相应的系统。本文首先介绍了国内外钢铁企业能耗的相关背景，以及能耗管理的发展现状，并分析和比较了常用的企业建模方法和能耗建模方法，在此基础上，提出了基于多视图集成的能耗建模方法，以适用于钢铁企业能耗建模。通过对钢铁企业能耗过程的分析，详细介绍了工序视图、工厂视图、能流视图的模型表示、逻辑关系和建模语义。论文还设计与开发了基于多视图集成的钢铁企业能耗模型系统。本文根据系统需求分析，设计了C/S的三层式整体架构、功能模块和后台数据库。系统采用组件、面向对象等技术实现了对该能耗模型系统的应用，并分析系统的实例效果。 本文以安徽省钢铁产业技术创新规划研究项目(项目编号: 09020203014)为应用背景，以面向生产工序的钢铁企业能耗建模为研究对象，对上述主要的研究成果进行了应用。 关键词：钢铁企业，能耗建模，多视图集成 Tongji University Master of Science in Engineering Abstract Tongji University Master of Science Abstract II ABSTRACT As the shortage of energy resources become serious and the demand for energy requirement in industrial development is increasing day by day, there is growing emphasis on the rational using of energy. As the big energy consumers, steel enterprises also focus attention on the energy management problem. Energy modeling is the basis and analysis tool for energy management; it can help to reduce energy consumption. This paper mainly focuses on modeling for energy in production processes of iron and steel enterprise, also designing and developing such a system. Firstly, this paper introduces the background of energy consumption in domestic and foreign steel enterprises and the development of energy consume management. Then by the analysis and comparison of common enterprise modeling methods and energy consumption modeling methods, a new energy consumption modeling method is proposed to apply for iron and steel enterprises, which is based on multi-views. After analyzing the process of iron and steel enterprises, it gives the details of model representation, logic and modeling semantics on process view, factory view and energy flow view. The paper also designs and develops such an energy consumption model system for iron and steel enterprises. According to system requirements, the C/S three-layer a