美国材料协会标准 A542 - A 542M - 19.pdf

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. Designation: A542/A542M − 19 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and- Tempered, Chromium-Molybdenum, and Chromium- Molybdenum-Vanadium1 This standard is issued under the fixed designation A542/A542M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (´) indicates an editorial change since the last revision or reapproval. 1. Scope* SI units are shown in brackets. The values stated in each 1.1 This specification2 1 system are not exact equivalents, therefore, each system must covers two types of 2 ⁄ 4 Cr-1 Mo and three types of Cr-Mo-V alloy steel plates for use in the be used independently of the other. Combining values from the quenched-and-tempered condition, intended for the fabrication two systems may result in nonconformance with this specifi- cation. of welded pressure vessels and components. 1.8 This international standard was developed in accor- 1.2 Materi