美国材料协会标准 A587 - 96 (2019).pdfVIP

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. Designation: A587 − 96 (Reapproved 2019) Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry1 This standard is issued under the fixed designation A587; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (´) indicates an editorial change since the last revision or reapproval. 1. Scope 2. Referenced Documents 3 1.1 This specification2 covers electric-resistance-welded 2.1 ASTM Standards: low-carbon steel pipe intended for use as process lines. A53/A53M Specification for Pipe, Steel, Black and Hot- Dipped, Zinc-Coated, Welded and Seamless 1.2 Pipe ordered under this specification shall be suitable for A370 Test Methods and Definitions for Mechanical Testing severe forming operations involving flanging in all sizes and of Steel Products bending to close radii up to and including NPS 4. A530/A530M Specification for General Requi