着色处理对铝合金阳极氧化膜光学性能影响的研究.pdfVIP

72 / 2010 7 Influence of Coloring on Optic Performance of Anodic Oxidation Film on Aluminum Alloy , , , , ( , 100083) Y Mei, JIANG Wu, LI Jianhua, LI Songmei, LI Ming (School of Materials Science and Engineering, Beihang niversity, Beijing 100083, China) : LY 12 AT T ; (SEM);XRD ; : LY12 20V 120min, 42m; ; , : ; ; ; : TG174 : A :2010) Abstract : T he Vvisible absorption characterization of anodic oxidation film on LY12 aluminum alloy after first coloring, pickling process and second coloring with acidity black ATT was researched. Alu minum alloy anodizing process was investigated; the surface and section morphologies and crystal structure of anodic oxide films were observed with Scanning Electron Microscope (SEM) and Xray Diffraction (XRD) . The optic performance of film after coloring was researched by Vvisible spec trophotometer. The results show that the optimized process which is in favor of increasing anodic oxi dation film thickness is as follows: anodizing voltage of 20V, anodizing time of 120min and film thick ness of 42m. The crystal structure was not changed by pickling process. T he Vvisible absorption characterization was increased by second coloring; the reason is that the roughness of film was im proved by second coloring after pickling process. Key words: aluminum alloy; anodizing; coloring; Vvisible spectrophotometer [ 1] [ 12] , [2] ,