国内外钛合金棒材超声波检验标准分析.pdf

46 /2002 6 Analysis of Standards and Specifications on the Ultrasonic Inspection of T itanium Alloy Bars ( , 100095) SHI i-wei (Institute of Aeronautical Materials, Beijing 100095, China) : 20 , , , , : ; ; ; + + : T G115.28 5; T G146.2 3: A: 1001-4381 ( 2002) 06-0046-05 Abstract : In the last 20 years standards and specifications on titanium alloys and theultrasonictest-, ing of thesematerials were established In this paper standards and specifications on the ultrasonic. , inspection of titanium alloys from some countries were analyzed and compared with Chinese stan- dards to give references for the development and revision of standards and specifications in the fu- ture. Key words: titanium alloy; bar; standard; specifications 20 , , (QAS) , , , (GB) (GJB) , , (HB) : , , ( 1) AMS 2380BApproval and Control of Pre- mium-Quality T itanium Alloys (2) 2630 , , AMS B Inspection Ultrasonic Prod- uct Over 0.5 Inch ( 12.7mm) T hick (3) AMS 2631BUltrasonic Inspection , T ita- , , nium and T itanium Alloy Bar and Billet ( 4) 2632 , , , AMS A Inspection Ultrasonic Of , , T hin Materials, 0. 5 Inch ( 12.7mm) and Under in , Cross-Sectional T hickness ( 5) - -83142 , , MIL F A Forging T itanium Alloys ,