双通信电源系统自动母联开关的设计与实现-电力系统保护与控制.pdf

第 47 卷 第 2 期 电力系统保护与控制 Vol.47 No.2 2019 年 1 月 16 日 Power System Protection and Control Jan. 16, 20 19 D I: 10.7667/PSPC180056 双通信电源系统自动母联开关的设计与实现 王福生，陈 峥，胡 博，丰 田，王圣杰 (国网宁夏电力公司信息通信公司，宁夏 银川 750001 摘要：当前双通信电源系统已经在国家电网公司各中心站和各电压等级 电站通信机房得到广泛应用，但部分负 载仍处于单路供电状态。为避免供电负载掉电而引起业务中断，进一步提高双通信电源系统的可靠性，对传统双 通信电源系统及其存在的问题进行分析。并在此基础上，以嵌入监测保护为手段，以控制逻辑为目的，提出一种 双通信电源系统 自动母联开关的设计方案。该方案实现了负载掉电情况下双电源系统的无缝切换。最终，通过仿 真实验表明，该 自动母联开关运作稳定，应对故障瞬时作出反应且灵敏可靠，能更好满足现实需求。 关键词：自动母联开关；双通信电源系统；供电可靠性 Design and implementation of automatic bus coupler switch for dual communication power system WANG Fusheng, CHEN Zheng, HU Bo, FENG Tian, WANG Shengj ie (Information Communication Company of Ningxia Electric Power Corp, Yinchuan 750001, China) Abstract: Currently, dual communication power supply system has been widely used in different central stations and communication rooms of substations with different voltage levels in State Grid Corporation of China, but some of the loads are still in the single-channel power supply state. In order to avoid power service interruption caused by power cut of power supply load, the reliability of the dual-communication power supply system is further improved, and the traditional dual-communication power supply system and its existing problems are analyzed. n this basis, this paper designs an automatic bus coupler switch for dual communication power supply system, which takes the automatic bus coupler switch