临界角式折射率测量仪.PDFVIP

19 Journal of Cheng Shiu University Vol.24 pp19-28(2011) 0 ()() 90 (qc) 20 The Measurement of Refractive Index by Critical Angle Shih Hsu Department of Electronic Engineering, Cheng Shiu University ABSTRACT When the laser light enters from the high refractive index medium (dense medium) to the low refractive index medium (coarse medium), have a corresponding critical angle, use this critical angle to obtain the unknown material refractive index. Now, the dense medium is the testing material, and the coarse medium is the air. This kind of measuring technology, obtains the unknown material refractive index accuracy to reach below the decimal point second. We know the green laser measures the material refractive index to be bigger than the red laser; the above confirming visible light is the normal dispersion. Moreover the temperature will also affect the material refractive index, the temperature is higher, and the refractive index will be smaller. The solution concentration will also affect the refractive index; the refractive index will increase along with the solution concentration. The systems is using He-N