浅析混床中排损坏原因及处理.docVIP

  • 40
  • 0
  • 约3.9千字
  • 约 4页
  • 2019-10-14 发布于河北
  • 举报
浅析混床中排损坏原因及处理 摘要:本文分析了我厂水处理离子交换器不能在高负荷下运行的原因,介绍了原系统设备存在的缺陷,并对之进行理论分析和改造,使交换器原出力提高30%,水处理制水能力由360t/h提高至420t/h。 Abstract: This paper analyzes the I-water ion-exchange device can not be run under high load the reasons for introducing the original system equipment defects, and the theoretical analysis and transformation, so that switches of the original to contribute to 30% increase in water treatment water capacity from 360t / h up to 420t / h. 关键词:离子交换器 压差 负荷 Keywords: Ion exchanger pressure load 一、前言 巨化热电厂水处理车间有六套离子交换器,但不能达到设计负荷能力,总制水量约360t/h,不能满足生产要求,预处理设备采用阳阴离子交换法脱盐。 二、问题的发现 我厂水处理车间的制水

文档评论(0)

1亿VIP精品文档

相关文档