渐变钢板弹簧动力学特性分析.pdfVIP

ISSN 1674-8484 汽车安全与节能学报, 第9 卷 第2 期, 2018 年 10/ 14 CN 11-5904/U J Automotive Safety and Energy, Vol. 9 No. 2, 2018 194 — 199 渐变钢板弹簧动力学特性分析 李舜酩，钱巍巍 （南京航空航天大学 能源与动力学院，南京210016，中国） 摘  要： 为了解决传统钢板弹簧设计计算方法难以考虑钢板弹簧实际工况的问题，建立了一个有限元 动力学计算模型。该模型通过综合考虑板簧安装约束、簧片之间接触等非线性因素，基于有限元模型 进行动力学特性分析；利用有限元瞬态动力学方法，通过激励下的响应获得钢板弹簧的动刚度、应力 随频率和幅值的变化规律，对出现的迟滞特性进行分析获得等效阻尼。结果表明：综合考虑约束及接 触非线性建立的模型精度较高，有限元动力学计算模型有效模拟了钢板弹簧实际工作状态。 关键字： 钢板弹簧；有限元分析；动力学特性；等效阻尼 中文分类号： U 463.33 文献标识码： A DOI:10.3969/j .issn.1674-8484.2018.02.010 Analysis on dynamic characteristics of leaf spring LI Shunming, QIAN Weiwei (1.College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanj ing 210016, China) Abstract: A finite-element dynamic analysis model was built to solve the problem that the traditional designing and calculation methods of leaf spring had difficult in taking consideration of the true working condition. The nonlinear factors of both constrains and contacts were considered comprehensively in the model, and the dynamic properties of the leaf spring was investigated. The responds of the model under excitation were acquired via finite-element transient dynamic method, and the laws of dynamic stiffness and stress under various frequency and amplitudes was obtained. The hysteresis was analyzed and the equivalent damping of leaf spring was calculated from the hysteresis. The result shows that the modeling method which takes comprehensive consideration of the nonlinear constrains and contacts can effectively simulate the true working condition of leaf spring. Keywords: leaf sprin