ABAQUS用户自定义子程序和应用子程序.pdfVIP

ABAQUS 6.14 用户自定义子程序和应用子程序① ★只着重于不同用户自定义子程序和应用程序的用途★ ★详细接口程序及用法参见ABAQUS 帮助文档★ 制作人：雷波 ABAQUS 用户自定义子程序 ABAQUS/standard 1 CREEP 定义时间相关的粘塑性的蠕变特性用户自定义子程序 User subroutine to define time-dependent, viscoplastic behavior (creep and swelling). 2 DFLOW 定义固结分析中的孔隙液体非均匀流速的用户自定义子程序 User subroutine to define nonuniform pore fluid velocity in a consolidation analysis. 3 DFLUX 定义热传递和扩散分析中的非均匀性通量的用户自定义子程序 User subroutine to define nonuniform distributed flux in a heat transfer or mass diffusion analysis. 4 DISP 定义特定边界条件的用户自定义子程序 User subroutine to specify prescribed boundary conditions. 5 DLOAD 定义非均匀性分布荷载的用户自定义子程序 User subroutine to specify nonuniform distributed loads. 6 FILM 定义热传递分析中的非均匀性膜系数及其相关的热沉温度的用户自定义子程序 User subroutine to define nonuniform film coefficient and associated sink temperatures for heat transfer analysis. 7 FLOW 定义固结分析中的非均匀性渗透系数及其相关的局部渗透压力的用户自定义子程 序 User subroutine to define nonuniform seepage coefficient and associated sink pore pressure for consolidation analysis. 8 FRIC 定义接触面上的摩擦特性的用户自定义子程序 User subroutine to define frictional behavior for contact surfaces. 9 FRIC_COEF 定义接触面上摩察系数的用户自定义子程序 User subroutine to define the frictional coefficient for contact surfaces. 10 GAPCON 用于热力耦合，热- 电-力耦合以及单一热传递分析中接触面和节点上的电导性 定义的用户自定义子程序 User subroutine to define conductance between contact surfaces or nodes in a fully coupled temperature-displacement analysis, coupled thermal-electrical-structural analysis, or pure heat transfer analysis. 11 GAPELECTR 用于热力耦合，热- 电-力耦合以及单一热传递分析中接触面上电导率定义的 用户自定义子程序 User subroutine to define electrical conductance between surfaces in a coupled thermal-electrical or a coupled thermal-electrical-structural analysis. 12 HARDINI 用于定义初始等效塑性应变及逆应力张量的用户自定义子程序 User subroutine to define initial equivalent plastic strain and initial backstress tensor. 13 HETVAL 用于给出热传递分析中内热源的用户自定义子程序 User subroutine to provide internal