红外遥控风扇毕业设计.docVIP

苏州市职业大学 毕业设计（论文）说明书 设计（论文）题目 红外遥控风扇 系 电子信息工程系 专业班级 09电子3 姓 名 张亚楠 学 号 097302342 指导教师 周昌雄 2012年5月18日 红外遥控风扇 PAGE II 摘　　要 作为传统的家用电器，随着空调的普及，电风扇的市场地位受到了巨大的冲击，传统的开关、调速功能已经不能满足市场的需求。人们希望电风扇在体积小、使用方便等的基础上，能够拥有更多的功能，而红外遥控的广泛应用及单片机技术的成熟，则使得红外遥控系统成为了电风扇的发展趋势。 本设计方案基于市场的需求，结合红外遥控设计简单、方便、成本低廉等特点，采用专用的遥控发射接收芯片HS0038，在此基础上设计了一个简易的红外遥控电风扇系统。系统包括接收和发射两大部分，本文设计实现了电风扇的基本功能：开关功能、五级调速功能。经过多次的测试与电路调整，系统的各项功能均能正常实现。 关键词：红外遥控，信号调制，编码，解码 Abstract As a traditional household appliance, along with the popularity of air conditioning, electric fan market position by the huge impact and the traditional switch, speed adjustment cant meet the demand of the market. People hope electric fan in the small volume, convenient, etc, and on the basis of to have more features, and the wide application of infrared remote control and single chip microcomputer technology maturity, it makes the infrared remote control system become the trend of the development of electric fans. This design scheme based on the demand of the market, combined with infrared remote control design is simple, convenient, low cost and other characteristics, the use of a special radio transmission HS0038 receiver chips, and based on this, designs a simple system of infrared remote control electric fan. System including receiving and launch of two parts, this paper designed the basic functions of the electric fan: switch function, category five speed adjustments. After many tests and circuit adjustment, the system can realize the functions are normal. Key words：Infrared remote control, Signal modulation, Encoding, Decoding - PAGE 1 - 目　　录 TOC \o 1-3 \h \z \u 摘　　要 I Abstract II 第1章 绪论 1 1.1 选题背景及意义 1 1.2 红外遥控的设计思路 2 第2章 硬件设计 4 2.1红外通信简介 4 2.2元器件介绍 5 2.2.1 AT89C51芯片 5 2.2.2 TC9012红外发射芯片 9 2.2.3 HS0038红外接收头 12 2.3电路原理图 14 2.3.