加工中心操作作业书.docx

地址：江苏省太仓市科教新城健雄路1号 邮编：215411 中德培训中心 Add：No.1 Jianxiong Road,S＆E New Town,Taicang Jiangsu 215411 AHK-Chien Shiung Training Center Phone:+86 512 Fax +86 512 CNC加工中心操作作业指导书 CNC Machining Center Operation Instruction 编号：ZD-QC-A25-2012 版次： A/0 Protective ShoesProtective Protective Shoes Protective Cap Protective Goggles Protective Clothes 1. 作业员着装合格 Make sure you wear the suitable uniform to keep safe CNC加工中心操作作业指导书CNC Machining Center Operation Instruction1/5 2. 装夹图纸 Stick the drawings to the board 3. 准备所用工、量具及辅件 Take the needed tools, gauges and accessorial tools 4.检查油液面 Check the oil 5.打开气压阀 Open the air pressure valve 6.打开机床总电源 Turn on the main power 7. 旋开急停按钮 Rotate Emergency button CNC加工中心操作作业指导书CNC Machining Center Operation Instruction 2/5 8.启动机床程序开关 Press the power on for the program 9.选择合适垫块装夹工件 Choose suitable pad and clamp the workpiece 10.机床回原点 Go back to the machine zero position 11.对刀并录入坐标 Tool setting and input the coordinate 12.进入程序界面，编写或调用程序 Enter program interface, edit or select program 13.加工零件 Machining the part CNC加工中心操作作业指导书CNC Machining Center Operation Instruction 3/5 14.打开防护门清理零件 Open the protective door and clean the part 15.检测零件 Check the part 16.取出零件 Unload and take out the part 17.机床回原点 Go back to the machine zero position 18.按下急停按钮 Press Emergency button 19.关闭机床程序 Press the power off for the program CNC加工中心操作作业指导书CNC Machining Center Operation Instruction 4/5 20.清扫机床工作台面及相关区域 Clean the milling table and the related area 21.工、量具及相关辅件归位 Tidy up tools, gauges and accessorial tools 22.关闭机床总电源 Turn off the main power 23.填写机床使用记录表 Fill in the form CNC加工中心操作作业指导书CNC Machining Center Operation Instruction 5/5