网络拓扑配置.docxVIP

第一个二层交换机 Switchen Switch#c onf t Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#vlan 2 Switch(config-vlan )# exit Switch(config)#vlan 3 Switch(config-vlan)#exit Switch(config)#int vlan 2 Switch(config-if)# %LINK-5-CHANGED: Interface Vlan2, changed state to up Switch(config-if) # Switch(config-if)#exit Switch(config)#int faO/1 Switch(config-if)#switchport access vlan 2 %LINEPROTO$UPDOWN: Line protocol on Interface Vlan2, changed state to upSwitch(config-if)#exit Switch(config)#int faO/2 Switch(config-if)#switchport access vlan 3 Switch(config-if) #cxit Switch(confi