【西门子】SIMATIC 分布式 I_O 通过 GSDML 文件组态 ET 200eco PN 故障安全模块 产品信息.pdfVIP

SIMATIC Distributed I/O Configuring ET 200eco PN Fail-Safe Modules with a GSDML File Product Information Security information Siemens provides products and solutions with industrial security functions that support the secure operation of plants, systems, machines and networks. In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial security concept. Siemens’ products and solutions constitute one element of such a concept. Customers are responsible for preventing unauthorized access to their plants, systems, machines and networks. Such systems, machines and components should only be connected to an enterprise network or the internet if and to the extent such a connection is necessary and only when appropriate security measures (e.g. firewalls and/or network segmentation) are in place. For additional information on industrial security measures that can be implemented, please visit (/industrialsecurity). Siemens products and solutions undergo continuous development to make them more secure. Siemens strongly recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use of product versions that are no longer supported, and failure to apply the latest updates may increase customers exposure to cyber threats. To stay informed about product updates, subscribe to the Siemens Industrial Security RSS Feed visit (/industrialsecurity). Introduction Note the following dependencies for PROFINET IO during configuration of ET 200eco PN fail-safe modules with a GSDML file. Note When using ET 200eco PN fail-safe modules with a GSD file on external masters, note that the warnings, information, and references contained in the F-module device manuals are still valid for other manuals. Please also observe the external master specifications. Requirement You require S7-FCT t