fmea失效模氏分析.docVIP

Copy (Cover Sheet): Approved By / Reviewed By / Prepared By / Alou Chang 4/10-c01 Notice: This cover sheet forms a part of the following directive( specification ) and is not to be discarded unless superseded by a revised issue. Form No.: 801-D007-03(981001) 1.0目的 將產品從設計段到量產段所發生設計■生產製程之作樂性問題利用FMEA進行嚴謹之技術分析，藉由分析結果 Subject: 失效模式分析(Failure Mode and Effect Analysis)作業流程 Doc. No.: Rev.: 0 FMEA Operation Procedure Page:l of 2 □ Engineering Directive (ED) □ Engineering Specification (ES) □ Manufacturing System (MS) 可以提早改正產品品質缺失，防止失效問題重現。 2.0範圍 適用於產品開發到量產前階段。 產品設計開發階段(C2):導入DFMEA設計失效模氏分析。 工程量試EPR階段(C4